Product order page - Order button located below
Danger Den Acrylic Clear Lucite Drive Bay Reservoir
Danger Den Single 5 1/4" Bay Reservoir
Danger Den Single Bay Reservoir (HDP) is designed to fit into one (1) 5-1/4 drive bays. Manufactured with Lucite for a clear view of the water level.
Specs:
Laser Cut Cast Acrylic Material
3/8" Thick Acrylic Side and Back Pieces
Water-tight seals and pressure-leak tested.
Fits in One (1) 5 1/4 Drive Bay
Uses HIGH FLOW FITTINGS (See Picture)
One (1) inlet and One (1) outlet fitting for higher reliability
Two (2) Pre-Drilled 5mm LED Holes (See Picture)
Easy to install/Refill Center divider to eliminate air bubbles
4 Fan Mounting Screws
Contoured edges and corners - injury free install
Installation:
Slide the Bay-Res reservoir into one 5 1/4 drive bay. Use the supplied screws to mount it into place. Connect the tubing. Note: Always leak-test equipment for
at least 24 hours before installing in case.
Danger Den Single Bay Reservoir (HDP) is designed to fit into one (1) 5-1/4 drive bays. Manufactured with Lucite for a clear view of the water level.
Specs:
Laser Cut Cast Acrylic Material
3/8" Thick Acrylic Side and Back Pieces
Water-tight seals and pressure-leak tested.
Fits in One (1) 5 1/4 Drive Bay
Uses HIGH FLOW FITTINGS (See Picture)
One (1) inlet and One (1) outlet fitting for higher reliability
Two (2) Pre-Drilled 5mm LED Holes (See Picture)
Easy to install/Refill Center divider to eliminate air bubbles
4 Fan Mounting Screws
Contoured edges and corners - injury free install
Installation:
Slide the Bay-Res reservoir into one 5 1/4 drive bay. Use the supplied screws to mount it into place. Connect the tubing. Note: Always leak-test equipment for
at least 24 hours before installing in case.