Product order page - Order button located below
Noctua NT-H1 Tim Solution Hybrid Thermal Compond - Not electrically conductive, non-corroding - Excellent Performance
Noctua's "Amazing" Hybrid Tim solution out-performs all other NOIN Conductive and most electrically conductive thermal compounds. Nocttu NT-H1 Tim
solution is not electrically conductive yet out-performas most conductive compounds.
Noctua's NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional CPU Cooling performance and maximum ease of use: A hybrid
thermal compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability. Excellent
choice for air cooling as well as phase change cooling.
Excellent performance
NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely
low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.
Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there's no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time
spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that's it!
Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn't require a longer "burn-in" time.
Excellent long-term stability
NT-H1 doesn't contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound's exceptional
curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.
Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there's no danger of short-circuits even in case of direct contact
with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and
copper
coolers.
Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers.
Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.
Specs:
Volume 1.4ml (for at least 15 applications)
Specific Gravity 2,49 g/cm³
Colour grey
Recommended storage time (before use) up to 2 years
Recommended usage time (on the CPU) up to 3 years
Peak operating temperature -50°C to +110°C
Recommended operating temperature -40°C to +90°C
Excellent choice for CPU Cooling, as well as Compressors & Phase Change Cooling Applications
Noctua's "Amazing" Hybrid Tim solution out-performs all other NOIN Conductive and most electrically conductive thermal compounds. Nocttu NT-H1 Tim
solution is not electrically conductive yet out-performas most conductive compounds.
Noctua's NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional CPU Cooling performance and maximum ease of use: A hybrid
thermal compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability. Excellent
choice for air cooling as well as phase change cooling.
Excellent performance
NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely
low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.
Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there's no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time
spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that's it!
Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn't require a longer "burn-in" time.
Excellent long-term stability
NT-H1 doesn't contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound's exceptional
curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.
Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there's no danger of short-circuits even in case of direct contact
with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and
copper
coolers.
Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers.
Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.
Specs:
Volume 1.4ml (for at least 15 applications)
Specific Gravity 2,49 g/cm³
Colour grey
Recommended storage time (before use) up to 2 years
Recommended usage time (on the CPU) up to 3 years
Peak operating temperature -50°C to +110°C
Recommended operating temperature -40°C to +90°C
Excellent choice for CPU Cooling, as well as Compressors & Phase Change Cooling Applications
Noctua NT-H1 Tim Solution Hybrid Thermal Compond
